PLUS Power meter Series Block PM130E

Features and technical specifications:

Multi functional 3-phase Power Meter :-
1. 3 voltage inputs and 3 current transformer-isolated AC inputs for direct connection to power line or via potential and current transformers
2. True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
3. Ampere/Volt demand meter
4. 25/50/60/400 Hz measurement capabilities

Real-time Waveform Capture :-
1. Real-time “scope mode” waveform monitoring capability
2. Simultaneous 6-channel one-cycle waveform capture at a rate of 64 samples per cycle

Programmable Logical Controller :-
1. Embedded programmable controller
2. 16 control setpoints; programmable thresholds and delays
3. Relay output control (see Available Options)
4. 1-cycle response time

Digital I/O :- 1. Optional four, eight or twelve digital inputs with 1-ms scan time; automatic recording of last five digital input change events with time stamps
2. Optional two or four relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses

Display :-
1. Easy to read 3-row (2×4 characters + 1×5 characters) bright LED display, adjustable update time and brightness
2. Auto-scroll option with adjustable page exposition time; auto-return to a default page
3. LED bar graph showing percent load with respect to user-definable nominal load current

Meter Security :-
1. Password security for protecting meter setups and accumulated data from unauthorized changes

The following functions are available

1. Digital I/O
2. Analog outputs
3. TOU – Battery-operated clock unit
4. Ethernet communication port
5. Profibus DP communication port
6. RS-232/RS-422/RS-485 communication port

GPRS communication port
This PLUS Power meter Series Block PM130 is easily insert in your schematic diagram and connect as you like way.

Digital I/O :-
1. 4DI/2DO module :-
2. 4 dry contact digital inputs (DI) for monitoring external contacts and receiving pulses from energy, water, and gas meters
3. Programmable de-bounce time; 1-ms scan time.
4. 2 electro-mechanical or solid-state relay outputs (RO) for alarms and controls, and for output energy pulses; unlatched, latched and pulse operations, fail safe operation for alarm notifications; programmable pulse width; direct remote relay control through communications;1-cycle update time.

8DI module :-
1. 8 dry contact digital inputs (DI) for monitoring external contacts and receiving pulses from energy, water, and gas meters
2. Programmable de-bounce time; 1-ms scan time. 12DI/4DO module
3. 12 dry contact digital inputs (DI) for monitoring external contacts and receiving pulses from energy, water, and gas meters
4. Programmable de-bounce time; 1-ms scan time.
5. 4 electro-mechanical relay outputs (RO) for alarms and controls, and for output energy pulses; unlatched, latched and pulse operations, fail safe operation for alarm notifications; programmable pulse width; direct remote relay control through communications; 1-cycle update time.

Analog Output :-
1. 4 optically isolated analog outputs with an internal power supply;
2. Options for 0-20mA, 4-20mA, 0-1mA, and  1mA output; 1-cycle update time.

Additional Communication Port – COM2 :-
1. A second COM2 communication port can be ordered as an expansion module. COM2 options available:
2. Ethernet 10/100 BaseT port; MODBUS/TCP , DNP3/TCP and IEC 60870-5-104 communications protocols
3. Profibus DP port
4. RS-232/RS-422/RS-485 port; MODBUS RTU, DNP3, SATEC ASCII and IEC 60870-5-101 communication protocols;
5. GPRS communications port

TOU – Battery-Operated Clock Unit :-
The TOU module provides:
1. A precise clock with battery backup; 6-year clock retention time
2. 4 dry contact digital inputs (DI) for monitoring external contacts and receiving pulses from energy, water and gas meters; programmable de-bounce time; 1-ms scan time.